Contact Us Today:info@skypowerinternational.com(864) 843- 4420
Humidity, Temperature & Pressure
Indicating instrument to measure the ambient humidity. Different models available.
Combined indicating instrument to measure the ambient temperature and rel. humidity and to determine the dew point temperature, saturation pressure, vapour pressure or saturation deficit. The values can be read directly at the scale. The temperature is measured with a mercury thermometer.
Round hygrometer with the measuring element in an immersion shaft attached axially to the back of the case. The instrument is designed to be fastened horizontally to a wall. The shaft protrudes through a bore hole into a neighbouring room
Combined indicating instrument designed to measure the ambient temperature and rel. humidity.
Combined indicating instrument designed to measure the ambient temperature and rel. humidity, as well as the representation of the normal climate acc. to DIN 50014, and of a comfort range.
A thermometer and a hygrometer are fixed on a joint base plate. Instrument for wall mounting.
Model Dr. Weihofen Instrument to be connected to the THIESdatalogger. The leaf wet ness is determined by means of the electrical conductivity of natural substances. The wetness period is shown as leading value with the information ”dry” or ”wet”. Each instrument has its separate scaling parameter, which is already integrated in the software program of the THIES-dataloggers.
Electrical instrument for the continuous measurement of the saturation potential of the soil which results from the pressure balance between tensiometer liquid and the ambient soil by means of a diaphragm (ceramic cell). A pressure sensor measures the pressure of the water tension in the soil.
Portable, handy, sturdy standard instrument for psychrometric humidity measurements. Used as a control instrument for humidity measuring instruments. The thermometers acc. to DIN 58661 can be calibrated. The thermometer capillary has a blue background and a clearly printed scale. The instrument is equipped with a moistening device and a psychrometertable. Supplied in a case.
Standard instrument for use in weather huts and thermometer huts. The instrument consists of the following: 2 Psychrometric thermometers acc. to DIN 58660 1 Maximum thermometer acc. to DIN 58654 1 Minimum thermometer acc. to DIN 58653 1 Aspirator with spring-wound drive 1 Psychrometer table 1 Moistening device as well as a foot with stand and holder.
Simple, sturdy measuring instrument. The air ventilation required is attained by rotary centrifugal movement. The instrument is supplied with the required moistening device along with a psychrometric table.
Black synthetic material case, lined with foam material for the above instrument including accessories.
(for use in ducts) Moisture control instrument for humidifier and dehumidifier. The instrument is mounted to the wall of a duct. The immersion stem protrudes through this wall into the measuring space. The model with 2 switches is equipped with an adjustable switch differential of 5 ... 25% rel. h.
To mount duct hygrostats 1.0509.60 / 70. The flange clamps the hygrostat to the stem and allows a variable immersion depth.
Consists of a protective gauze and a wind shield. Is put onto the shaft of the in-stream type hygrometer and protects the measuring element from coarse dust and error measurements in case of wind velocities >3 m/s.
(not depicted) A device to protect the humidity measuring element from coarse dust (> 0.32 mm) and error measurements in case of wind velocities > 3 m/s. Suitable for above duct hygrostat.
Gauze- and wind protection protects the humidity measuring element from coarse dust (> 0.32 mm) and error measurements in case of wind velocities > 3 m/s. Suitable for above hygro transmitter.
Moisture control instrument for humidifier and dehumidifier. The desired value can be set by means of a rotary knob.
Instrument for measurement and recording of the relative humidity.
Recording instrument. The housing consists of a plastic-metal combination. The axes are supported by pivot bearings.
Recording instrument with a transparent plastic case. The axes are supported by pivot bearings.
A triple recording instrument for the most important meteorological data temperature, rel. humidity, and barometric air pressure. Reliable, sturdy model with spring-wound clockwork mechanism.
Measures and indicates humidity. Equipped with electrical output for longrange transmission. Sturdy construction. The exposed parts such as the case head and the immersion stem are made of stainless steel.
Instrument designed for measurement of temperature and air humidity. The data are output as electrical analogue signals. The transmitters consist of a capacitive humidity element and a Pt 100 resistance thermometer.
Instrument designed for measurement of temperature and air humidity. The data are output as electrical analogue signals. Humidity value is displayed additionally.
Protective covering for the Hygro-Thermo- or Hygro- Transmitters out-of-doors. Helps to prevent atmospheric influences and radiation errors from influencing the measured results.
Flat-section indicator for display of humidity, temperature or pressure values. The background of the indicator is black to facilitate reading of the red digits.
with 2 adjustable limit contacts Flat-section indicator for display of humidity, temperature or pressure values.
The resistance signal from the data transmitter is converted into current and/or voltage proportional to the measured value. This makes it possible to control subsequently added recording or switching instruments.
Measuring instrument to determine the air humidity values based on the dry and moist temperature. An attached water container provides for the moistening of the psychro sensor. The double-walled protection tubes protect the sensor from radiation.
The instrument serves to convert the small measuring value signals of the Leaf Wetness Transmitter into a standardized signal, which can be transmitted also over a long distance afterwards.
Model Wild Protective hut to hold meteorological measurement instruments. Protects them from precipitation and eliminates radiation errors. Louvered walls guarantee good air circulation. Delivery includes a stand with three stairs made of hot galvanized steel.
Small version of the preceding huts, without stand and stairs.
Digital portable measuring instrument with integrated measuring sensor for the measurement of rel. humidity and temperature.
A mercury glass thermometer, can be calibrated. Employed to determine the highest air temperature.
Consists of a mercury glass thermometer with a holder and a plastic guide tube. The immersion depth governs the depth of the measuring point in the soil.
Consists of a mercury glass thermometer with a bent immersion stem, determines the lowest and highest temperature of the soil. The immersion depth governs the depth of the measuring point in the soil.
not depicted Holds the extreme thermometer for use in soil, described in the preceding.
Determines the lowest and highest ambient temperature. Consists of a maximum thermometer and a minimum thermometer with stand.
Model Six Thermometer determines the current temperature as well as the lowest and the highest temperatures of the measuring period. There is a magnet included in the delivery to set back the markers for extreme value identification. Instrument is installed onto a plane wall.
Thermometer determines the current temperature as well as the lowest and the highest temperatures of the measuring period. There is an adjustment knob to set back the marker threads for extreme value identification.
Thermometer determines the water temperature. A glass mercury thermometer in a metal tube with a large perforated water container.
Instrument for measurement and recording of the ambient temperature.
The measuring element is protected by a waterproof and stainless steel tube, it has a PVC cable resp. a Teflon cable.
Instrument measures the temperature above the surface of the soil. The temperature sensor is protected by a wellventilated double-walled tube with roofing plate. The instrument is inserted into the soil.
A foil temperature transmitter to measure temperatures on plane and curved surfaces. The platinum measuring coil is embedded between two 0.5 mm thick polyamide (Kapton) foils.
The instrument is designed to measure the temperature out-of-doors precisely. It has a specially constructed well-ventilated thermal radiation shield made of an anodized aluminium.
This instrument is designed to measure the precise air temperature with the air of a ventilated sensor. The sensor is protected by a double thermal radiation shield. A built-in ventilator provides for the necessary air flow.
Electrical measured value receiver to measure the ambient temperature, The measured value is emitted as a resistance value in accordance with IEC 751 resp. as an analogue voltage or current signal.
Indicating instrument with an inner frame of polished brass and an outer frame of polished brown wood.
Indicating instrument with a mounting flange for wall mounting. Light grey varnished.
A very accurate instrument. Test certificate enclosed. Supplied in a leather case.
An instrument designed to measure and test atmospheric air pressure in meteorological stations, laboratories etc. The instrument is equipped with an additional thermometer. Delivery in a wooden transport box
For vertical installation of the mercury station barometer.
This instrument is used to measure and record the atmospheric air pressure. The recording is carried out by means of a hand wound clock work drum mechanism acc. to DIN 8300 and DIN 58658 (3.0800... ; 3.0804....) or with a Quartz clock work (3.0815....). The on-site elevation can be set by means of an adjusting screw. Delivery includes a set of recording charts (100 sheets ).
A precision measuring and recording instrument to determine the atmospheric pressure. Elevation above the sea level can be set at the measuring site on a setting knob. The recording is carried out by means of a hand wound clockwork drum mechanism acc. to DIN 8300 and DIN 58658.
An electrical transmitter which indicates directly the measured values of the atmospheric air pressure. The measured value is indicated and delivered as electrical resistance value.
Barotransmitters measure the barometric ambient pressure and emit the measured value as an electrical voltage value. Owing to its low current consumption, It is particularly suitable for use in combination with data loggers. To be mounted preferably in data logger systems.
Indicating meas. instrument with analogue output to determine the atmospheric pressure. An aneroid capsule with inductive displacement pickup serves as a sensor. The sensor signal is amplified electronically and displayed on a LC display. The analogue output is available for the connection of electronic recording and control instruments. Behind the front panel is a potentiometer to reduce the measured value to sea level. The instrument is in the form of a switch cabinet for panel installation.
Displaying measuring instrument for four air pressure parameters. Instrument with integrated pressure sensor. Analogue output and serial interface serve for out of measuring data to processing systems.
The Clima Sensor 2000 serves for the measurement of important environmental data. Depending on the type of task it is available as combined measuring instrument. The analogue outputs are configured as standard signals so that they can be used for the coupling on customary bus systems.
The Clima Sensor D serves for the measurement of important environmental data. Depending on the task, it is available as combined measuring instrument. Model D is equipped in addition with a DCF 7 radio controlled clock, and an integrated serial interface. An internal heating serves as protection against dew.
Displaying measuring instrument for four meteorological parameters (for ex. temperature, rel. humidity, global radiation, air pressure).
Displaying measuring instrument for four meteorological parameters (for ex. temperature, rel. humidity, global radiation, air pressure).Instrument with integrated serial interface and analogueinterface for data input and -output.
Hangers are used to mount measuring transmitters to telescope masts. The extension is 1 m from the mast. The outer end has a holder specially designed for the respective data transmitter.
An alcohol glass thermometer, can be calibrated. Employed to determine the lowest air temperature.
A mercury glass thermometer, can be calibrated. Designed for measuring the current ambient temperature. Also used as a spare thermometer for psychrometers model August.
A mercury glass thermometer, can be calibrated. Designed for measuring the soil temperature. Supplied with a holder. The immersion depth governs the depth of the measuring point in the soil.
Protective case for hygrothermo transmitter compact with outdoor installation.
(100 pcs.) for Barograph 3.0800.10.xxx
Digital measurement and display instrument for air humidity and air temperature with integrated sensors in housing of synthetic material.
For mounting of 2 radiation transmitters or respectively 2 brightness transmitters together onto a mast.
For mounting of a radiation transmitter or respectively a brightness transmitter onto a mast.
The holder serves for mounting a radiation transmitter or brightness transmitter onto a mast.
The pin is used to mount the measuring transmitter situated in the weather and thermal radiation shield, order no. 1.1025.55.000/100 on traverses or holders compact.
Your Climate is Our Business™ Copyright 2009 Sky Power International, LLC. All rights reserved. Privacy Policy | Return Policy | Product Warranty Information